CAN Bus Module

emuc-b202 series

USB to dual isolated CANbus 2.0B/ J1939/ CANopen

  • CANbus 2.0B backward compatible with 2.0
  • Support baud rate 100/125/250/500(default)/800/1000K
  • Support CAN message acceptance filter
  • Keep configuration after hardware reboot
  • Up to 6000 CAN messages per second (receive data)
  • Additional driver to support Linux SocketCAN
  • Termination resistor enabled/disabled by jumper
  • Complies with EN61000-4-5 2.5kV Surge protection
  • Support Listen-only mode
  • Support SAE J1939/CANopen high layer protocol (Optional)
  • Complies with IEC 60950-1:2005 + A1: 2009 + A2:2013 2.5kV
  • HiPOT protection
  • Complies with EN61000-4-2 (ESD) Air-15kV, Contact-8kV
  • Supports 3rd mounting hole and USB Pin header for out-ofminicard installation
  • 30μ" golden finger, 3-year warranty
  • Supports -40 to +85 degrees
Form-Factor mPCIe
Input I/F USB 2.0
Output I/F CANbus 2.0B
Output connector 2 x DB-9
TDP 1.62W (3.3V, 490mA)
Dimensions 30(W) x 50.9(L) x 8.35(H) mm
Temperature Operation: W/T temp: -40°C ~ +85°C
Storage: -55°C ~ +95°C
Environment Vibration: 5G @7~2000Hz
Shock: 50G @ 0.5ms
Software Windows: XP(32bit), 7(32/64bit), 8/8.1(32/64bit), 10(32/64bit)
Linux: Kernel 2.6 and above (Native CDC-ACM driver),
Kernel 2.6.38 and above (SocketCAN Driver), 32/64bit
QNX: 6.6
Ordering Information
Part Number EMUC-B202-W1 (CAN2.0B, Wide Temp.)
Description USB to dual isolated CANbus 2.0B Module
Part Number EMUC-B202-W2 (J1939, Wide Temp.)
Description USB to dual isolated CANbus J1939 Module
Part Number EMUC-B202-W3 (CANopen, Wide Temp.)
Description USB to dual isolated CANbus CANopen Module